Canon Pro-1000 series Online Manual page 511

View Print History
This function starts the Canon IJ XPS preview, and displays the print history.
Note
• You can use this function only with the XPS printer driver.
View Printer Status
Starts the Canon IJ Status Monitor.
Perform this function when you want to check the printer status and how a print job is proceeding.
Note
• If you are using the XPS printer driver, the "Canon IJ Status Monitor" becomes the "Canon IJ XPS
Status Monitor".
About
Opens the About dialog
The version of the printer driver, plus a copyright notice, can be checked.
In addition, the language to be used can be switched.
Initial Check Items (Cleaning / Deep Cleaning / System Cleaning)
Before running Cleaning, Deep Cleaning, or System Cleaning, check that the printer power is on. Then
press the tank cover open button on the printer to open the tank cover.
Check the following items for each ink.
• Check the amount of ink
• Make sure that you push in the ink tank completely until you hear a clicking sound.
• If an orange tape is adhered to the ink tank, peel it off completely.
Any remaining tape will hinder ink output.
• Check that the ink tanks are installed in their correct positions.
In addition, System Cleaning consumes an extremely large amount of ink.
Before executing this function, check the items below. Then, if you feel it necessary, execute System
Cleaning.
• Did you use Nozzle Check to check the nozzle status and was there a problem?
• Did the status remain unchanged even after Deep Cleaning was executed?
Initial Check Items (Nozzle Check)
Before running Nozzle Check, check that the printer power is on, and open the cover of the printer.
Check the following items for each ink.
• Check the amount of ink
• Make sure that you push in the ink tank completely until you hear a clicking sound.
• If an orange tape is adhered to the ink tank, peel it off completely.
Any remaining tape will hinder ink output.
• Check that the ink tanks are installed in their correct positions.
Initial Check Items (Update Media Information)
Check that the printer is connected to the computer and that printer is turned on.
If you are unable to update media information, check the following points.
box.
remaining in the tank.
remaining in the tank.
511