Canon Pro-1000 series Online Manual page 458

Image Default (Selections based on the printer setting), On (Auto photo fix)*1, Off, Red-Eye correction*2
optimize
*1 The scene or person's face of a shot photo is recognized and the most suitable correction for each
photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a
scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable
color, brightness, or contrasts automatically to print.
*2 Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices. (May
not be selected depending on the device.)
Trimming Default (Off: No trimming), On (follow the camera's setting), Off
Settings on Printer
You can change the PictBridge (Wireless LAN) print settings from the PictBridge print settings screen.
Set the print settings to Default on the PictBridge (Wireless LAN) compliant device when you want to print
according to the settings on the printer.
This section describes the procedure to display the PictBridge print settings screen.
1. Make sure printer is turned on.
2. Select Various settings on HOME screen.
LCD and Operation Panel
3. Use button to select Device settings and press OK button.
4. Use button to select PictBridge print settings and press OK button.
5. Check message that is displayed and press OK button.
The PictBridge print settings screen is displayed.
For more on the setting items:
PictBridge print settings
458