Canon Pro-1000 series Online Manual page 486

To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees left
when orientation is [Landscape] check box.
Print Quality
Selects your desired printing quality.
Select one of the following to set the print quality level that is appropriate for the purpose.
Highest
Prints with quality as the highest priority.
High
Gives priority to print quality over printing speed.
Standard
Prints with average speed and quality.
Paper Source
Select the source from which paper is supplied.
Manual Feed
Paper is supplied from the manual feed tray in the back.
Rear Tray
Paper is always supplied from the rear tray.
Important
• Depending on the media type and size, the Paper Source settings that can be selected may differ.
Copies
Specifies the number of copies you want to print. You can specify a value from 1 to 999.
Important
• When the application software that you used to create the document has the same function,
specify the settings on the printer driver. However, if the print results are not acceptable, specify the
function settings on the application software.
Always Print with Current Settings
Prints documents with the current settings starting from the next print execution.
When you select this function and then close the
set on the Quick Setup, Main, Page Setup, and Clear Coating tabs are saved and printing with the
same settings is possible starting from the next print execution.
Important
• If you log on with a different user name, the settings that were set when this function was enabled
are not reflected in the print settings.
• If a setting was specified on the application software, it has priority.
Defaults
Restores all the settings you have changed to their default values.
Click this button to return all settings on the Quick Setup, Main, Page Setup, and Clear Coating tabs
to their default values (factory settings).
Save Commonly Used Settings dialog box
This dialog box allows you to save the information that you set on the Quick Setup, Main, Page Setup,
and Clear Coating tabs and add the information to the Commonly Used Settings list on the Quick
Setup tab.
printer driver setup window, the information that you
486