Canon Pro-1000 series Online Manual page 201

Not Connected
Indicates the printer is required to perform wireless LAN setup.
Performing/Changing Wireless LAN Settings
Not Set
Indicates the printer cannot be used on network. Specify an IP address or enable IPv6.
IP Address Overlap
Indicates the IP address is duplicated to another printer.
Unknown
Indicates the printer used in the past cannot be used currently.
4. IP Address
Displays the printer IP address.
5. Location
Displays the printer location if it is registered.
Assigning Printer Information
6. Connection Method
Displays printer connection method (wired or wireless LAN).
7. Setting Method
Displays printer setting method.
• Auto
Appears if the printer is used by IP address specified automatically.
• Manual
Appears if the printer is used by IP address specified manually.
8. MAC Address
Displays the MAC address of the detected printer.
9. Device Name
Displays the printer device name if it is registered.
Assigning Printer Information
10. IPv6
On appears when an IPv6 address is assigned for the printer.
Menus on IJ Network Device Setup Utility Screen
This section describes menus on IJ Network Device Setup Utility screen.
201