Reset Setting (Item For Administrator) - Canon Pro-1000 series Online Manual

Reset setting (Item for administrator)

Select this setting item from Device settings on Various settings.
Important
• This setting item is for the administrator. The administrator password is required to change settings.
You can set the settings back to the default.
• Web service setup only
Sets the Web service settings back to the default.
• LAN settings only
Sets the LAN settings other than the administrator password back to the default.
• Settings only
Sets the settings such as the paper size or media type back to the default.
• Device info sending setting only
Sets only the device information sending settings back to the default.
• Reset all
Sets all settings you made to the printer back to the default. The administrator password specified for
the printer is set to the default setting.
Note
• You cannot set the following setting items back to the default:
• The language displayed on the LCD
• The current position of the print head
• CSR (Certificate Signing Request) for encryption method (SSL/TLS) setting
• Media information registered to the printer by using Media Configuration Tool
166