Performing/Changing Wired Lan Settings - Canon Pro-1000 series Online Manual

Performing/Changing Wired LAN Settings

Follow the procedure below to perform/change wired LAN settings.
1. Start up IJ Network Device Setup Utility
Detected printers are listed.
2. Select printer to perform/change settings from printer list.
Select the printer with Wired LAN displayed on Connection Method and the setting other than
Unknown or Setup Completed displayed on Status to perform settings.
3. Select Protocol Settings... on Printer menu.
The Confirm Printer Password screen appears.
For more on the password, refer to Administrator Password.
Note
• Clicking the
4. Enter password and click OK.
The Protocol Settings screen appears.
5. Perform/change settings.
You can switch the screen between IPv4 and IPv6. Click the tab to switch the protocol.
• IPv4 settings
1. Use IPv4 address
Always selected. (displayed in a gray out state)
2. Get IP address automatically
Select this option to use an IP address automatically assigned by a DHCP server. DHCP
server functionality must be enabled on your router.
icon allows you to perform/change settings.
205