Specifications - Canon Pro-1000 series Online Manual

Specifications

Important
• The following values may vary depending on the operating environment.
General Specifications
Power supply
Power consumption
Operating environment
Storage environment
Dimensions (W x D x H)
Weight
Printing resolution (dpi)
Print Head/Ink
Memory
Network Specifications
Communication protocol
Wired LAN
Wireless LAN
100-240 V AC (50/60 Hz)
Printing: 37 W max.
Standby (minimum): 2.5 W max. *1
OFF: 0.4 W max. *2
*1 The wait time for standby cannot be changed.
*2 The printer uses a trace amount of power even when turned off. To stop all
power consumption, turn off the printer and unplug the power cord.
Temperature: 41 to 95 °F (5 to 35 °C)
Humidity: 10 to 90 % RH (no condensation)
* The performance of the printer may be reduced under certain temperature
and humidity conditions.
Recommended conditions:
Temperature: 59 to 86 °F (15 to 30 °C)
Humidity: 10 to 80 % RH (no condensation)
* For the temperature and humidity conditions of papers such as photo paper,
refer to the paper's packaging or the supplied instructions.
Temperature: 32 to 104 °F (0 to 40 °C)
Humidity: 5 to 95 % RH (no condensation)
28.5 x 17.2 x 11.3 inches (723 x 435 x 285 mm)
* With the trays retracted.
Approx. 71.1 lb (Approx. 32.3 kg)
* With the Print Head and ink tanks installed.
2400 dpi horizontally * x 1200 dpi vertically
* Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Total 18432 nozzles (MBK / PBK / C / M / Y / PC / PM / GY / PGY / R / B / CO
each 1536 nozzles)
1 GB
TCP/IP
Supported Standards: IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T)
Transfer speed: 10 M/100 Mbps (auto switching)
Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b
305