Lan Settings (Item For Administrator) - Canon Pro-1000 series Online Manual

LAN settings (Item for administrator)

Select this setting item from Device settings on Various settings.
Important
• This setting item is for the administrator. The administrator password is required to change settings.
• Change LAN
Enables either wireless LAN, wired LAN, or direct connection. You can also disable all.
• Wireless LAN setup
Selects the setup method for wireless LAN connection.
Note
• You can also enter this setting menu by selecting LAN settings on the HOME screen. In this case,
enable wireless LAN.
◦ Cableless setup
Select if you specify the settings of the access point information to the printer directly from a device
(such as a smartphone) without operating the wireless router. Follow the on-screen instructions of
the connecting device for the setup procedure.
◦ Standard setup
Select when you perform settings for wireless LAN manually using the operation panel of the printer.
◦ WPS (Push button method)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi
Protected Setup (WPS) push button method. Follow the on-screen instructions during setup.
◦ Other setup
■ Advanced setup
Select when you perform settings for wireless LAN manually. You can specify multiple WEP
keys.
■ WPS (PIN code method)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi
Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
• Confirm LAN settings
The list of wired/wireless LAN or direct connection settings of this printer is displayed on the LCD.
Selecting Print LAN details allows you to print the list.
◦ LAN setting list
The list of wired LAN settings of this printer is displayed on the LCD.
The following setting items are displayed. (Some setting items are not displayed depending on the
printer settings.)
Items
Connection
Setting
Active/Inactive
157