Canon Pro-1000 series Online Manual page 173

• For security reasons, we recommend you use 6 and more alphanumeric characters.
7. When the completion message is displayed, select OK.
Setting Standard User Password
Enable the standard user mode and set a standard user password by following the steps below.
1. Display printer status on web browser.
2. Select Security.
The menus are displayed.
3. Select Standard user mode settings.
4. When the confirming message is displayed, select Yes.
5. Enter a password, and then select OK.
Important
• The following character restrictions apply to the password:
• Set the password by using 4 to 32 characters.
• The allowed characters are single-byte alphanumeric characters.
• For security reasons, we recommend you use 6 and more alphanumeric characters.
6. When the completion message is displayed, select OK.
173