Canon Pro-1000 series Online Manual page 209

1. Use IPv4 address
Always selected. (displayed in a gray out state)
2. Get IP address automatically
Select this option to use an IP address automatically assigned by a DHCP server. DHCP
server functionality must be enabled on your router.
3. Use next IP address
Select this option if no DHCP server functionality is available in your setup where you use the
printer, or you want to use a fixed IP address.
Enter the IP address, subnet mask, and default gateway.
• IPv6 settings
Note
• The setting items below are available only when Infrastructure is selected for Network
Type:.
If Direct is selected, the setting items below are displayed in a gray out status.
209