Specify Page size and Type for the paper to be used, select Settings, then press the OK button.
6. Load the prepared paper in the paper source specified in the message.
If the paper source is the manual feed tray, load one sheet of paper at a time.
7. Open the paper output tray gently.
Open the output tray extension, then pull out the paper output support.
8. Press the OK button.
The print head alignment sheet will be printed and the print head position will be adjusted automatically.
This takes about 12 minutes.
Note
• If the automatic adjustment of the print head position has failed, an error message appears on the
LCD.
Message Appears
9. When the completion message appears, press the OK button.
Note
• If the print results are still not satisfactory after adjusting the print head position as described above,
align the print head
manually.
243