Performing/Changing Wireless Lan Settings - Canon Pro-1000 series Online Manual

Performing/Changing Wireless LAN Settings

Follow the procedure below to perform/change wireless LAN settings.
Important
• Enable cableless setup before performing printer setup. (Not required if you change the IP address.)
For details, search for "NR049" on your printer's online manual and see the page shown.
1. Start up IJ Network Device Setup Utility
Detected printers are listed.
2. Select printer to perform/change settings from printer list.
Select the printer with Wireless LAN displayed on Connection Method and the setting other than
Unknown or Setup Completed displayed on Status to perform settings.
3. Select Protocol Settings... on Printer menu.
The Confirm Printer Password screen appears.
For more on the password, refer to Administrator Password.
Note
• Clicking the
4. Enter password and click OK.
The Protocol Settings screen appears.
5. Perform/change settings.
You can switch the screen between IPv4 and IPv6. Click the tab to switch the protocol.
• IPv4/IPv6 settings
icon allows you to perform/change settings.
207