Resume The Oil And Power System; Check The Vehicle State; Reset Hardware; Sleep Mode - Coban VT105 User Manual

Gsm/gprs/gps vehicle tracker
Table of Contents

Advertisement

7.35. Resume the Oil and Power System

Send "resume+password" to tracker, it will reply "Resume engine succeed", that means vehicle has resume the
oil supply.

7.36. Check the Vehicle State

Send SMS command "check+password" to the tracker device in the vehicle, It will reply the status of external
power, battery, GPS reception, ACC, door, GSM reception, GPRS and oil consumption to the
numbers.
For example: Send SMS "check123456" to the tracker device in the vehicle, it will reply following SMS after
executed the command.
Power: ON/OFF Battery: 100%
Door:OFF ACC:ON
GPS:OK
GPRS:OFF line
GSM Signal:21
(1-32 the higher digit it shows; the stronger of GSM reception it receives.)
Oil:65.5%

7.37. Reset Hardware

Send SMS "reset+password" to tracker device to reset the GSM module and GPS module of the tracker device, it
will reply "reset ok"
7.38.

Sleep Mode

7.38.1 This function is deactivated as default, send "sleep+password+space+on", tracker will reply "sleep on ok".
When vehicle is not driving (ACC is OFF), GSM module fall asleep; GPS module shut off; and tracker works
in low power consumption. Calling, SMS command and any triggered alarm can awake it.
7.38.2 Cancel: Send "sleep+password+space+off", tracker will reply "sleep off ok", then tracker won't sleep, GSM
and GPS works all the time.

7.39. Check IMEI

Send SMS command "imei+password" to the unit. E.g. Send SMS command "imei123456" to the tracker
device, an IMEI number in 15 digits will reply to your cell phone
authorized
.

Advertisement

Table of Contents
loading

Table of Contents