Acc Working Alarm; Cut Off The Oil And Power System; Calibration Of Fuel Sensor - Coban GPS-303 User Manual

And then send the code to carrier's phone number, and forward the message from carrier to mobile
phone number.
Take china mobile for example, mobile users can send "ye" to china mobile number 10086, and
10086 will send user's balance message to tracker, and then tracker forward the balance message to
mobile phone number , following is an illustration how this function works.
balance123456 10086 ye
Mobile
Forward balance message to mobile phone

6.19. ACC working alarm

6.19.1 This function is deactivated by default. To active this functions, send "ACC+password" to
tracker, it will reply "ACC ok". And tracker will send "ACC on+latitude & longitude" to authorized
numbers when detect ignition on, that means the vehicle has been started; and tracker will send
"ACC off+latitude & longitude" to authorized numbers when ignition off and ACC is off, that
means vehicles has been stopped.
6.19.2 Send "noACC+password" to deactivate this function, tracker will reply "noACC ok"
6.19.3 This configuration can only activate and deactivate the alarm to authorized numbers; it will send
to web platform automatically in GPRS mode and can't be deactivated

6.20. Cut off the oil and power system

6.20.1 Send command "stop+password" to tracker, tracker will execute it and reply "Stop engine
Succeed". And it will remain immobile state until next command to resume.
6.20.2 Stop mode
Execute immediately: Send command "quickstop+password" to tracker, it will reply "quickstop
OK". Then tracker will stop the car immediately after "stop" command.
Execute depends on speed(Default mode): Send command "noquickstop+password" to tracker, It
will reply "noquickstop OK", Then the tracker won't stop the car immediately after "stop" command,
instead, it will reply "it will be executed after speed less than 20KM/H", and stop the car when the
speed is less than 20KM/H.
6.20.3 Resume the Oil and Power System
Send "resume+password" to tracker, it will reply "Resume engine succeed", it means the oil supply is
resumed.

6.21. Calibration of fuel sensor

6.21.1 Due to the different height of fuel tank and fuel level sensor specifications, tracker need to set an
appropriate zero value and full range value to detect the precise fuel percentage.
6.21.2 Zero calibration: Send " oilzero+password " to tracker when the fuel tank is empty , tracker will
12
Received and execute
Send ye out to 10086
Tracker
Send balance back
Received Balance message
10086(China mobile)
Received ye from number in
the tracker and process