Table of Contents
Advertisement
6.2.2. Central locking system wiring diagram:
6.3. SIM Card Installation
6.3.1 Use a tweezers or a sharp thing to touch the SIM CARD popup switch, the SIM CARD slot will pop up, take out
the SIM card slot to load the SIM card, and then put the SIM card slot back to its original position after confirm
the SIM card in the right place.
6.3.2 Please make sure that the SIM card is GSM network and able to execute the function of incoming calls display,
no calls can be diverted and the PIN code is locked. The SMS format must be TXT format, and can't recognize
the PDU format.
6.3.3 If need to save historical positions or positions when GSM not available, please insert SD card to its slot.
6.3.4 User need open the case to install the second internal SIM card
7. Function and Operation
7.1. Turn on device
7.1.1 Connect the positive (red) and negative (black) wire to 12V or 24V car power, wait for 1 minute after connecting
power to wait tracker works normal, and then turn on the backup battery switch
Advertisement
Table of Contents
