Acc Working Alarm; Cut Off The Oil And Power System; Resume The Oil And Power System; Arm - Coban GPS103-A User Manual

30km/h.For below that rate; it may cause the excursion of the GPS signal
influenced by clouds etc.

6.7.8 ACC working alarm

6.7.8.1 This function is disabled as default. To active this functions, send
"ACC+password+1" to tracker, it will reply "ACC,CONFIG OK". And tracker
will send "ACC on+latitude & longitude" to authorized numbers when detect
ignition action, that means the vehicle has been started.
6.7.8.2 Send "ACC+password+0" to disabled this function, tracker will reply
"ACC,CONFIG OK".

6.8 Cut off the Oil and Power System

Send SMS command "DY+password" to the tracker device, it will reply "DY
CONFIG OK" to your cell phone from the tracker device, and stop your car oil
pump or elec as well.

6.9 Resume the Oil and Power System

Send SMS command "TY+password" to the unit, It will reply "TY,CONFIG
OK" and resume your car oil pump or elec as well.
6.10

Arm

6.10.1 Set up arm by SMS
6.10.1.1 Send SMS command "DOOR+password+1" to the tracker device in
12