Function Of Remote Controller (Option); Remote Controller Programming; Electric Lock And Vapor Lock Switch; Arm/Lock(All Lock/Unlock Functions Need The Optional Central Lock Relay ) - Coban VT105 User Manual

Gsm/gprs/gps vehicle tracker
Table of Contents

Advertisement

7.23. Function of Remote Controller (option)

Button
Function
ARM / Lock
DISARM /unlock
ARM & Silent mode
SOS
Deterrence/car
search
7.24.

Remote controller programming

7.24.1 Supply power to tracker to turn it on and then short press the SOS buttons for 7 times, programming
mode is ready after siren beeps 2 times.
7.24.2 Short press
successful after siren beeps 1 time.
7.24.3 Short press
controller is successful after siren beeps 1 time.

7.25. Electric lock and Vapor lock switch

7.25.1 Send command "locktype+password+space+1", tracker will reply "locktype ok", switch to vapor
lock in 5 seconds.
7.25.2 Send command "locktype+password+space+0", tracker will reply "locktype ok", switch to electric
lock in 0.5 seconds, electric lock is the default one.
7.26. Arm/lock(All lock/unlock functions need the optional central lock
relay )

7.26.1. arm/lock door by SMS

Send SMS command "arm+password" to the tracker, the terminal of vehicles will change to arm state,
Meanwhile, car door is locked, and it will reply SMS "Tracker is activated".
If the vehicle are in ignition state (ACC is ON), car door will be locked, but ARM will fail, Meanwhile , it will
reply SMS "set up fail! pls turn off ACC".
If engine turn off, but door is open, then the car can't enter ARM state and reply "setup fail, pls close the
door."
Descriptions
Press for 0.5 second, the siren will beep 1 time.
Press for 0.5 second, the siren will beep 2 times.
Press for 0.5 second when it is in disarm state, the siren will
beep 1 time. No voice from siren when alarm triggered and quit from
siren mode automatically when disarm.
Press for 3 seconds, Tracker will send SOS alert to authorized phone
numbers without voice.
Press for 0.5 second when it is in arm state, siren will beep 10 seconds,
press disarm button
to quit.
on the first remote controller, programming for the first remote controller is
button on the second remote controller, programming for the second remote

Advertisement

Table of Contents
loading

Table of Contents