Table of Contents
Advertisement
Quick Links
GSM/GPRS/GPS Tracker User
Manual
Preface
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and
correctly. Make sure to read this manual carefully before using this product. Please note that
specification and information are subject to changes without prior notice in this manual. Any change
will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or
omissions in this document.
1
Advertisement
Table of Contents
Related Manuals for Coban GPS302
Summary of Contents for Coban GPS302
- Page 1 GSM/GPRS/GPS Tracker User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release.
-
Page 2: Table Of Contents
Contents Summary ..............................4 Applications..............................4 Hardware Description ..........................4 Specifications .............................. 4 Usage ................................5 5.1 SIM Card Installation ..........................5 5.2 Battery and charger..........................5 5.3 Startup ..............................5 5.4 Initialization ............................6 5.5 Change the password ..........................6 5.6 Authorization ............................ - Page 3 5.38 Configure parameters by USB ......................17 5.39 GPRS setting ............................17 5.40 Less GPRS traffic ..........................18 5.41 Modes switch between “SMS” and “GPRS” ..................18 5.42 Setup monitor center number ......................18 5.43 Web platform and PC installation tracking software ................19 Cautions ..............................
-
Page 4: Summary
1. Summary Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. 2. Applications Protect child / the old / the disabled / Personnel Management 3. Hardware Description Side 3.2 Front 3.3 Side... -
Page 5: Usage
Charging Voltage Chargeable changeable 3.7V 900mAh Polymer battery Battery Standby 180hours Storage Temp. -40° C to +85° C Operation Temp. -20° C to +70° C Humidity 5%--95% non-condensing 5. Usage 5.1 SIM Card Installation 5.1.1Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format. -
Page 6: Initialization
5.3.4 When this unit receives GPS signals normally, you can use it and do any setting as the instructions of this manual. 5.3.5 Status indicator: The green indicator keep flashing 1 time every second after acquire GSM signal; and every 3 seconds under GPRS state. The red indicator keeps on when charging and turn off after fully charged. -
Page 7: Set The Contacts
successfully authorized, the unit will reply “admin ok!” in SMS. 5.6.3 Send SMS：“noadmin+password+space+authorized number” to delete the authorized number. 5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please send：“admin123456 +8613322221111” to tracker to set 13322221111 as an authorized number. -
Page 8: The Function Of Buttons
5.9. The function of buttons button function description Press 3 seconds to send SOS message to the authorized number and call circularly. Hang up Short press SOS under call state. Short press any button of ①②③ to answer Answer ① Call Press 2 seconds,call the first contact phone number ②... -
Page 9: Location Based Service (Lbs)
Send SMS command “fix030s005n +password” to the tracker device, it will report the latitude & longitude at intervals of 30 seconds for 5 times. (s:second, m:minute, h:hour). This command set must be in 3 digits and the maximum value is 255. 5.11.2 Track with unlimited times upon time interval: Send SMS “fix030s***n+password”... -
Page 10: Gps Drift Suppression
5.14 GPS drift suppression 5.13.1 This function is deactivated by default, activate this function by Sending "suppress+password" to tracker, it will reply" suppress drift ok". The GPS data stop updating if vehicle is not moving and latitude and longitude always keep same, and GPS data updates automatically when vehicle is moving. -
Page 11: Data Load
numbers or monitoring platform (server), but the logged tracking data should be loaded to the monitoring platform via SMS command. 5.19.2 Store upon times: Send SMS: “save030s005n+password” to the tracker unit, it will reply “save ok”, and will store the lat, long locations every 30 seconds for 5 times. (S: second, m: minute; h: hour). -
Page 12: Shock Sensor Alarm
mode after the authorized number answer the call. 5.22. Shock Sensor Alarm 5.22.1 Setup: Shock sensor alarm is deactivated in default settings. If needed, please send SMS “shock+password” to tracker device, and it will reply “Shock is activated!”, it means shock sensor SMS “Sensor alarm has set up successfully. -
Page 13: Multi-Area Management
5.23.2 Cancel: Send SMS:” nostockade+password” to deactivate this function. 5.24. Multi-area management 5.24.1 Set Area Send SMS command "area+password+space+latitude,longitude+space+areaname,distanceM" to tracker(distance unit: M for meter, K for kilometer), it will reply "area01 ok". Fox example: Send "area123456 22.353648,113.543678 school,800M". Note: 5 areas at most and the distance between two points can't be less than the total distance in the 2 commands, and different areas can't cover each other. -
Page 14: Over Speed Alarm
movement (the default distance is 200m), it will send SMS “Move+ latitude & longitude” to the authorized numbers at interval of 3 minutes. 5.25.2 Cancel: Send SMS “nomove+password” to deactivate the movement alarm. 5.26 Over speed alarm 5.26.1 Set up: Send SMS “speed+password+space+080” to the unit (suppose the speed is 80km/h), and it will reply “speed OK!”. -
Page 15: Start Work On Specific Time
5.29.2 Sleep by shock sensor Send "sleep+password+space+shock", tracker will reply "sleep shock ok", it will enter sleep mode if doesn’t detect any vibration, GPS module shut off, and LED will be off too. Vibration or any operations can awake it. 5.29.3 Deep Sleep by Shock Sensor Send "sleep+password+space+deepshock"to activate it , tracker will reply "sleep deepshock ok". -
Page 16: Charges Inquiry
5.32 Charges Inquiry Function:Send SMS command "balance+password+space+phone number+space+content" to tracker , it will forward the content to the specified phone number and return the content from the specified phone number. Realization:When gps device receives balance command,it will extract the sim card number,"phone number"... -
Page 17: Tcp/Udp Switch
5.36 TCP/UDP Switch Command: "gprs+password,0,0" TCP with keep alive data, this is the default mode. Command: "gprs+password,1,0" TCP without keep alive data Command: "gprs+password,0,1" UDP with keep alive data Command: "gprs+password,1,1" UDP without keep alive data 5.37 Reset Send SMS “reset+password” to tracker, it will reply “ reset ok”, the GSM and GPS module of the tracker will be reset. -
Page 18: Less Gprs Traffic
5.39.2.3 For instance, send SMS “up123456 jonnes 666666” to the tracker, and if succeeded, the tracker returns “user, password OK” Note: 123456 is tracker device password, jonnes is the user name for GPRS login, 666666 is the password for GPRS login. 5. -
Page 19: Web Platform And Pc Installation Tracking Software
5.43 Web platform and PC installation tracking software 5.43.1 Web based platform www.gpstrackerxy.com. Configuration IP: 202.104.150.75 Port: 9000. Please check “software platform user manual” included in the CD for detailed operation information. 5.41.2 PC based installation tracking software included in the CD in package. Cautions Please comply with the instructions to extend the unit life: 1.Keep the unit dry.