Page 1
GSM/GPRS/GPS Tracker User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release.
1. Summary 1.1 Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. 1.2Features 1.2.1 Taillights shape, easy to hide, waterproof design, and outdoor installation. 1.2.2 Built-in GSM, GPS antenna. 1.2.2 Support GPS and LBS (location based service) double tracking solution 1.2.3 Support SMS / GPRS / Internet Network data transmission (GPRS/Internet instructions includes in CD in package)...
ON/ OFF button/SIM card slot/USB Fixed Frame Harness 4. Accessories: the accessories and its function: This device is divided into the following two types according Type A: 6 PIN hardness, tracking, monitoring, ACC, cut off oil and power. Type B: Add remote controller to ARM & DISARM on the basis of type A. Photo Name Specs...
Remote Optional, type B controller 5. Specs Content Specs 7.5×5.0×2.4cm Dim. Weight GSM/GPRS Network 850/900/1800/1900Mhz Band GPS sensitivity -159dBm GPS accuracy Cold status 45s Time To First Fix Warm status 35s Hot status 1s Car charger 12V~24V battery Chargeable 3.7V 1000mAh Li-ion battery -40°...
6.1.5 Note: The pink wire can be connected to the car original horn; or connected to the siren buying with the tracker. (Siren is Option) 6.1.6 Please install the SOS button on the place driver can touch. 6.2 SIM CARD Installations 6.2.1 Use the screwdriver accompanied with the device to open sealed buckle and insert the SIM card, the SIM card is placed correctly if heard the sound of lock, the SIM will automatically pop up if press it gently.
6.6 .Authorization There are 5 numbers to be allowed to authorize in the tracker at most. 6.6.1 Call and track the tracker device for 10 times from cell phone in success, it will make the cell phone number as the authorized number automatically, and reply “add master ok”.
6.8. Auto track continuously 6.8.1 Track with limited times upon time interval: Send SMS command “fix030s005n +password” to the tracker device, it will report the latitude & longitude at 30s intervals of 5 times. (s:second, m:minute, h:hour). This command set must be in 3 digits and the maximum value is 255. 6.8.2 Track with unlimited times upon time interval: Send SMS “fix030s***n+password”...
6.11 Absolute street address by SMS 6.11. 1 You must set up the APN of your local GSM network for the SIM card in tracker first before using this function, if there is user name and password for GPRS login, Please refer to 6.33 to configure the APN, user name and password for GPRS login.
platform via SMS command. Logging upon times: Send SMS: “save030s005n+password” to the tracker unit, it will reply “save 6.14.2 ok”, and will log the lat, long locations every 30 seconds for 5 times. (S: second, m: minute; h: hour). Multi-logging:Send SMS:”save030s***n+password” to tracker device, it will reply “save ok”. 6.14.3 Logging Clearance: send SMS: “clear+password”...
6.18. Alarms 6.18.1 Low battery alarm 6.18.1.1 Send SMS “lowbattery+password+space+on”, it will send SMS “low battery+latitude/longitude” to authorized numbers 2 times in total in 15 minutes interval when voltage of battery is going to be about 3.55V. 6.18.1.2 This function activates as default, send SMS “lowbattery+password+space+off” to deactivate.
numbers Remark: The first latitude & longitude is coordinate of the top left corner of the Geo-fence, while the second latitude & longitude is the coordinate of the bottom right corner, it will alarm at interval of 3 minutes. Cancel: Send SMS “nostockade+password” to deactivate this function. 6.18.6 Multi-area management 6.18.6.1 Set Area Send SMS command "area+password+space+latitude,longitude+space+areaname,distanceM"...
6.18.8 Over speed alarm Set up: Send SMS “speed+password+space+080” to the unit (suppose the speed is 80km/h), and it will reply “speed OK!”. When the target moves exceeding 80km/h, the unit will send SMS “speed+080!+ latitude & longitude” to the authorized numbers at interval of 3 minutes. Cancel: Send SMS “nospeed+password”...
Silent mode beep one time. No voice from siren when alarm triggered and quit from siren mode automatically when disarm. Press for 3 seconds, Tracker will send SOS alert to authorized phone numbers without voice. Deterrence/ Press for 0.5 second when it is in arm state, siren will beep 10 seconds, press disarm car search button to quit.
ignition. 6.23.2 DISARM BY Remote controller (Option for model B) Press on remote controller for 0.5 seconds, the car will enter DISARM state and, siren beeps two times and tracker doesn’t send message. 6.24 Alarms under Arm State 6.24.1 ACC alarm The unit will send SMS “ACC alarm+lat/long”...
6.26 Check the Vehicle State Send SMS command “check+password” to the tracker device in the vehicle, It will reply the status of the power, battery, GPS, ACC, door, GSM signal, GPRS status and oil to the authorized numbers. For example: Send SMS “check123456” to the tracker device in the vehicle, It will reply following SMS.
6.28.2 Sleep by shock sensor Send SMS command "sleep+password+space+shock"to tracker device, tracker will reply "sleep shock ok", it will enter sleep mode if no shake is detected or ACC is off , GPS module shuts down, LED will be off . Shake or any operation can awake the tracker . (This mode only works under SMS mode) 6.28.3 No sleep mode Send SMS command”sleep+password+space+off”...
memory and open serial debugging tool in the format of text , refer to the instructions for more operations . Note: Correct password is need every time you configure the tracker. 6.33 GPRS setting User must send SMS via cell phone to set up IP, port and APN before starting GPRS. 6.33.1 Setting up APN 6.33.1.1 APN standards for Access Point Name and differs from country to country.
6.33.3 IP and port setup 6.33.3.1. Send SMS via a cell phone: adminip +password + Space + IP Address + Space + Port Number. If succeeded, SMS “adminip OK” returns from the device. 6.33.3.2 e.g, Send SMS command “adminip123456 202.104.150.75 9000” to the tracker device, If succeeded, “adminip OK”...
6.37 Web platform and PC installation tracking software user manual 6.37.1 Web based platform www.gpstrackerxy.com. Configuration IP: 202.104.150.75 Port: 9000. Please check “software platform user manual” included in the CD for detailed operation information. 6.37.2 PC based installation tracking software user manual included in the CD in package. 7.
Page 22
Call without SMS Authorized number is wrong or without setting any authorized number Stop engine fail Check the relay for engine cut is right connected. reply or cannot Remote Controller Remove external power , turn on the device and program again receive alarm SMS Siren’s voltage is DC12V/24V/1A.
Need help?
Do you have a question about the GPS304 and is the answer not in the manual?
Questions and answers