Safety Regulations; Circumference And Interval (Rule-Of-Thumb) - GLP VOLKS LICHT SPOT Instruction Manual

6.1 Safety regulations

• Disconnect the fixture from the mains power before commencing any
maintenance work!
• Wait minimum 15 minutes after removing the power to allow the fixture to
cool down.

6.2 Circumference and Interval (rule-of-thumb)

The maintenance schedule of any given fixture depends on the installation
environment. Hence no specific guidelines can be given. The cleaning intervals
given below are suggestions, based on practical experience. We suggest that
you start with these and develop your own maintenance schedule as you see
the fixtures performance in your specific environment.
Maintenance Task
Outside optic
Gobos
Glass gobos
Prism
Iris
Inside lens
Fan and air channel
Moveable parts
Attention:
• Never let optical parts come into contact with oil or fat.
• Before running the fixture wait until all parts are touch dry.
• Never touch lenses with bare fingers.
GLP German Light Products GmbH
Interval How
weekly soft cloth and glass cleaning fluid
yearly vacuum cleaner, airbrush, etc.
yearly soft cloth and glass cleaning fluid
yearly soft cloth and glass cleaning fluid
yearly vacuum cleaner, airbrush, etc.
yearly soft cloth no glass cleaning fluid
monthly vacuum cleaner, airbrush, etc.
yearly suitable fatty oil
(Instruction version 1.01) / from software version 1.07
20