Maintaining And Cleaning; Safety Regulations; Maintenance And Interval (Rule-Of-Thumb) - GLP impression X4 Bar 20 Instruction Manual

2)
Rainbow-effect Stop will pause this function. After resuming the rainbow-effect will be continued
from the current color.
3)
The Rainbow-effect will run synchronously only if started from one of the predefined colors (see
1)
also before).

5 Maintaining and Cleaning

The I M P R E S S I O N X
I M P R E S S I O N X
necessary to clean the air inlets and outlets as well as the optical LED lenses from
time to time. For safe operation it is absolutely essential that the fixture is kept clean
and that dust, dirt and smoke-fluid residues must not build up on, or within the fixture.
Otherwise the fixture's light-output will be significantly reduced or damages can
occur. Regular cleaning will not only ensure the maximum light-output, but will also
allow the fixture to operate reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recom-
mended, under no circumstances should alcohol or solvents be used!

5.1 Safety regulations

Pull out the mains power plug!
Wait min. 15 minutes after disconnecting power to allow the fixture to cool
down.

5.2 Maintenance and Interval (rule-of-thumb)

The contamination of the fixture depends on the environment details. Hence no
general guidelines can be given. The intervals given below are only suggestions
from our experience.
Position
LED reflector and optical system
Fan and air channel
Attention:
Never let optical parts come into contact with oil or fat.
Before running the fixture wait until all parts are dry.
Never tough lenses with bare fingers.
Impression X4 Bar 20
4 B a r 2 0 is a fixture of very low maintenance. It is only
4 B a r 2 0
Interval
weekly
monthly
GLP  German Light Products GmbH
In this way
soft brush /lint-free cloth
vacuum cleaner, airbrush, etc.
from software version: v0.26
16