Check For Updates - Pitney Bowes dm300m Installation Manual

7
Install the Scale
You must now fit and configure the scale.
The system can operate with its integrated scale OR an external USB platform,
but not with both. If you have purchased an external USB platform, install it as
described in the right hand column and do not install the integrated platform
which may have been supplied with your system.
Integrated Scale
Position the scale as shown. Plug
the connector on the scale into the
matching connector on the franking
machine.
When the display asks you to
enter the scale location code,
key in the correct scale code
for your location from the map
and select OK.
8
Add postage funds
You need to add funds to your franking machine before you can use it.
Connect to the Pitney Bowes Data Centre
The franking machine automatically connects with the Data Centre and, after a
short delay, displays your account balance.
Adding funds
You now need to add postage to your franking machine.
• Select Refill Postage.
• Enter the amount you wish to add and then select OK. This refill amount must
be in increments of £50.
Confirm the amount to add by selecting Yes.
•
• The franking machine communicates with the Data Centre to add postage and
confirms when complete.
• The display asks if you would like a receipt. Select Print Receipt and press the
Tape button to print your receipt on a tape strip.
9

Check for updates

Your franking machine now automatically checks for any new software, including
any new Envelope Messages associated with your account.
If the display asks if you wish to install the updates, always select 'GET UPDATE
NOW' or your franking machine will not complete its installation correctly. DO
NOT switch the machine off during the update process.
The display shows the status of the update. When it shows 'System Update
Complete', select Return Home. The display may also tell you when the next
data upload is planned and/or whether daylight savings time has been set. These
prompts are for information only, just select Continue or OK.
Congratulations - your franking machine is now ready to use.
Turn the page and follow Step 10 to frank your first piece of mail.
External Platform
Connect the USB cable between the
platform and the DM300M as shown.
Fit the scale connector cover.
CODE 24
CODE 23
CODE 22
Belfast
Dublin
CODE 21
Cork
CODE 20
Orkney Code 24
Shetland Code 25
Edinburgh
Glasgow
Manchester
Sheffield
Liverpool
Birmingham
Cardiff
London
Bristol
Canterbury