Call Park Pickup - Siemens optiPoint 410 User Manual

Operating the Telephone with the Display
Step by Step
If you select the park option or press the park key, the
telephone attempts to place the call on hold. If the call
is placed on hold, you are prompted to enter a park po-
sition. Once you have confirmed your input or if auto
dial time has elapsed, the call is parked and you will re-
ceive confirmation or an error message if the call was
not successfully parked.
Parking a Call
s
You are conducting a call or have placed a call on hold.
> :
Select this menu item and confirm
Park? >
or
Press key.
Call park
o :
Enter park position and confirm.
The call is parked and the confirmation message "call
parked" is displayed. Make a note of the park position.

Call Park Pickup

You can only invoke Call Park Pickup if the telephone is
in idle mode, you hear a dial tone when you seized the
line, or you are conducting a single call.
If you are using the two or four-line telephone menu
when making calls, you can select Call Park Pickup from
the telephone menu in idle mode or during a single-line
call. You can also configure a function key as a call park
pickup key.
If you select the Call Park Pickup option or press the call
park pickup key when in idle mode, you will be prompt-
ed to enter the relevant park position.
If you lift the handset for instance and hear a dial tone
and then press the call park pickup key, you will be
prompted to enter the relevant park position.
If you selected the Call Park Pickup option or pressed
the call park pickup key during a single call, the current
call is placed on hold and you are prompted to enter the
relevant park position.
Once you have entered and confirmed the park position
or the auto dial time has elapsed, the relevant call is
picked up and you are connected to the previously
parked party.
51