Key Clicks; Rollover Volume - Siemens optiPoint 410 User Manual

Customizing the Telephone
Step by Step
>
7=Key click vol.?
o e
>

9=Rollover Volume?

o e
102
Please note that the setting for room acoustics is
reset to "1=Normal" if you deactivate the function
keys "2=Echoing" or "3=Muffled".

Key Clicks

You can decide whether or not to have key clicks to pro-
vide feedback when a key has been pressed. Three vol-
ume levels are available and can be adjusted as indicat-
ed below.
Key clicks are only audible when the phone is in a call
state. You do not hear key clicks when you configuring
the telephone.
Prerequisite: You are in the "Audio Settings"
menu.
:
Select and confirm. The current setting is displayed.
>
You can increase or decrease this value with:
uv
the control keys on the telephone or
<>
the arrow keys or
g
to the keypad keys.
:
Confirm the setting. The new setting is displayed as a
>
value.
Rollover Volume
You can adapt the volume for rollover as follows:
Prerequisite: You are in the "Audio Settings" menu
page 97.
:
Select and confirm. The current setting is displayed.
>
You can increase or decrease this value with:
uv
the control keys on the telephone, or
<>
the arrow keys, or
i
to the keypad keys.
:
Confirm the setting. The value of the new setting is dis-
>
played.
page 97