Siemens optiPoint 410 User Manual page 184

Web Interface
Ringer Volume
Setting the ringer volume.
•
•
•
In case of a multiline telephone, this setting can be set individually for each
line. Please note the message shown on the display.
Rollover Volume
While you are busy on one line of a multiline telephone, the "Rollover" func-
tion shows you whether another call is coming in on another line. You can
set the volume level using the following values (1-5):
•
•
•
Selecting a Function
Select the required functions for both first and second level function keys.
The following options are available for selection:
Function Key
Clear definition
(Clear)
Selected dialing
Abbreviated dialing
Repeat dialing
Missed calls
Voice Messages
Forwarding
Loudspeaker
Mute
Ringer off
Hold
184
Minimum value: 1 (quiet)
Maximum value: 5 (loud)
Default value: 3
page 178 page 74
Minimum value: 1 (quiet)
Maximum value: 5 (loud)
Default value: 3
page 178 page 102
1
1
Explanation
Clear current definition.
Configure function key as a selected dialing key
and program telephone number.
Configure a function key as an abbreviated dialing
key.
Configure a function key as a redial key.
Configure a function key to display missed calls
list.
Assign a function key for displaying voice messag-
es.
Assign the "Call Forwarding" function to a function
key.
Configure a function key as a loudspeaker key.
Assign a function key for muting the microphone.
Define a function key to switch ringer on/off.
Assign a function key for holding calls.