Park-Service; Call Park - Siemens optiPoint 410 User Manual

Step by Step
Operating the Telephone with the optiPoint display module

Park-Service

Call Park

You can use the Park Service to park an active call on a
park service telephone. After the call has been parked,
it is disconnected from your telephone and is available
for pickup.
The call can be picked up by you or any other user from
the telephone where the park service was used (see
also page 49).
Call Control
Bill Smith
987654321
Consult/Transfer
Open the menu and select Park.
Call Control
Bill Smith
987654321
On Hold
Parkkennung
eingeben
5
Park
o
Enter the park ID using the keypad.
Mon 07/03/05 11:34AM
00:24
Park
Park Pickup
Mon 07/03/05 11:34AM
00:24
Del
/123
143