Introduction; Overview - Siemens optiPoint 410 User Manual

Introduction

Introduction

Overview

The optiPoint 410/420 economy/economy plus/standard S V6.0 is a
modern multi-functional IP telephone. It is designed for connection to data
networks and is not directly connected with an ISDN system or to the
PSTN.
The optiPoint 410/420 economy/economy plus/standard S V6.0 enables
voice communication via the standard Internet Protocol (IP). It is compati-
ble with the signaling stack in compliance with the SIP (Session Initiation
Protocol) protocol specification.
The optiPoint 410/420 economy/economy plus/standard S V6.0 can be
used just like a conventional telephone – the only difference being that
your calls are directed via a data network. The telephone has an Ethernet
interface so that when using the TCP/IP protocol, you can make the tele-
phone calls both via your own intranet and via the worldwide Internet.
The optiPoint 410/420 economy/economy plus/standard S V6.0 also sup-
ports other standard protocols, which optimizes the data and voice trans-
mission and simplifies the administration of the unit. For example, the ad-
ministrator can download updates for equipment software or feature
enhancements to the optiPoint 410/420 economy/economy plus/
standard S V6.0 via the FTP server.
The optiPoint 410/420 advance S V6.0 features a two-line display and spe-
cial dialog keys, which allow user-friendly navigation through the menu
structure of the unit's software. A wide variety of features and programma-
ble keys enable you to configure the telephone individually to meet most
requirements.
14
This manual describes how to use the optiPoint 410/420 economy/
economy plus/standard S V6.0 when it is connected to Sylantro
from Siemens.
Some of the features described in this manual are only available be-
cause they are provided by Sylantro. If you are not using the
optiPoint 410/420 economy/economy plus/standard S V6.0 in a Sy-
lantro environment, contact the administrator to obtain the corre-
sponding operating manual.