Conferencing; Introducing The Conference; Ending The Conference - Siemens optiPoint 410 User Manual

Operating the Telephone with the Display
Step by Step
>
Create local Conf.?
>
Local Conf. disconnect? >
>
Clear both calls?
38

Conferencing

You can't use this function with optiPoint 410/
420 economy/economy plus
This feature is sometimes known as three-way calling.
Prerequisite: You are conducting a consultation call
( page 36).

Introducing the Conference

Prerequisite: You are conducting a consultation call
( page 36).
:
Select and confirm. The following appears in the dis-
>
play: "Creating local Conf.
"In Conference" appears on the display.

Ending the Conference

Changing back to single-line calls
:
Confirm.
You are reconnected with the first party. The second
party is placed on hold. You can now:
• alternate between the two parties;
• connect the two other parties (transfer);
• re-enter the conference call;
• terminate the active call – you are connected to the
second party.
or End both calls using the menu
:
Select and confirm. Both calls are terminated, and the
>
display shows "Cleared". You can start a new call.
or End both calls by hanging up
Prerequisite: "Allow Join in conference" was deactiva-
ted by the service personnel.
t
Replace the handset or press the loudspeaker key (in in
speakerphone mode). The display shows "Cleared".
You can start a new call.
"