Centralized Conference; Confirm To End The Conference - Siemens optiPoint 410 User Manual

Operating the Telephone with the Display
Step by Step
Conference
>
Add to Conference?
Disconnect conference? >
>
Consultation?
>
Disconnect conference? >
40

Centralized Conference

When centralized conference is established, it can only
be handled as a unit, i.e. as a single call in its own right.
No information on or control of individual calls is avail-
able.
Your system administrator can configure a function key
with Conference to create a server based conference
( page 90).
Prerequisite: You are conducting a consultation call
( page 36).
Press the conference key.
or
:
Select and confirm to create the conference.
>
"In Conference" appears on the display for all confer-
ence participants.
The first option is offered.
Add a another second party to the conference
:
To add an additional consultation, select consultation
>
to dial the second party (
The conference changes On Hold.
After the second party has answered you are able to:
• Alternate between single call and conference.
Single call changes On Hold and conference be-
comes active or reversed.
• Disconnect the single call.
Conference becomes active.
• Add the singel call to the conference.
Converence integrates the single call and becomes
active.
Ending cetralized conference
:

Confirm to end the conference.

page 36)