Table of Contents
Advertisement
Viewing your air conditioner
Checking the remote controller
You can activate the air conditioner by pointing the remote controller away from it. When using the remote controller, always
point it directly at the air conditioner.
Remote controller display
Turn on/off the air conditioner
Set the Purity function
Set the Turbo/Long function
Increase/Decrease the temperature
Air swing(Left/Right)
Activate/Deactivate air flow blade
movement automatically right and left
Set the On Timer on
Set the Off Timer on
This button is not functional
• When you press the button, a short ring will sound and a transmit indicator(
display.
NOTE
• Heater and Smart Saver functions are not supported by this model.
• Remote controller will remember the most recent temperature setting if you turn off the air conditioner and then
turn it on again.
12
Mirage_AP36M0@_IBIM_E_34573A(1).indd 12
Power
Purity
Turbo/Long
Temp + -
by 1°C
On Timer
Off Timer
Mode
Set one of the 4 operation modes (see
pages 14~17 for instructions)
Air swing(Up/Down)
Activate/Deactivate air flow blade
movement automatically up and
down
Fan
Adjust how much air flows through
the air conditioner with the 4 different
fan speeds such as Auto/Low/
Medium/High
Set
Set the timer
Cancel
Cancel the timer
Time Up
Increase the time when
setting the timer
Time Down
Decrease the time when
setting the timer
)appears on the remote controller
2012-02-21 오후 1:08:29
Advertisement
Table of Contents
