Checking The Remote Controller - Samsung AP80S0A Series User & Installation Manual

Checking the remote controller

The functions may be different depending on the model.
f You can activate the air conditioner by pointing the remote controller away from it. When using the remote controller,
X
always point it directly at the air conditioner.
f When you press the button, a short ring will sound.
X
Remote controller button
Keep the indoor air cool while saving the
Turbo – Set quick and powerful cooling.
Long – Set the long function to spread out
the cool air further away.
(Not supported by this model)
Adjusts the temperature.
Sets the timer to turn off the air conditioner
• Long, Heater, Beep Off, Air swing(Up/Down, Left/Right) functions are not supported by this model.
NOTE
Installing the batteries
1. Open the battery cover.
f Gently press the part on the battery cover and push it in the direction of the arrow.
X
2. Insert two AAA batteries.
f Check and match the "+" and "-" signs accordingly. X
3. Close the cover.
f You should hear click sound when the cover is locked properly.
X
• Be careful not to get the remote controller wet.
CAUTION
• The signal may not be received well of electronic lighting style fluorescent lampssuch as inverter fluorescent lamps
are in the same space.
NOTE
• If other electrical products operate by the remote controller, call your nearest contact center.
PAC_아프리카 중동향AP80S0A_IBIM_34514A-02_EN.indd 11
Smart Saver
electricity.
Turbo/Long
Temperature
Timer
Power
Turn on/off the air conditioner. Turn on/off
the air conditioner.
Mode
Set one of the 4 operation modes.
Beep Off
Turn off the beep sound.
(Not supported by this model)
Fan ▲, ▼
Adjusts the fan speed.
Air swing (Up/Down)
Activate/Deactivate air flow blade movement
automatically up and down.
(Not supported by this model)
Air swing (Left/Right)
Activate/Deactivate air flow blade movement
automatically right and left.
(Not supported by this model)
2015-04-23 오후 2:18:53
11