Table of Contents
Advertisement
Installing the interface module
Installation procedure and method
1. Remove the cover of the electrical component box.
- Remove the cabinet on the side of the outdoor unt.
2. Attach the interface module
- Refer to the illustration for the location and attach the interface module.
When you attach the interface module, make sure that it doesn't get
tangled with the wires or other parts.
3. Connect the power and communication cable for the interface module.
- Connect the outdoor unit PCB with the 12V power cable.
- Within the package, there's a power cable with 'interface module' written
on it. Make sure to use the exclusive power cable for the interface module.
Mirage_AP36M0@_IBIM_E_34573A(1).indd 55
Connect 12V
power cable
Outdoor unit
Outdoor unit
terminal board
Connect communication cable
2012-02-21 오후 1:10:04
55
Advertisement
Table of Contents
