Table of Contents
Advertisement
Installing the air conditioner
12. Connecting drain hose
1) To prevent condensation from forming on the drain hose, insulated the drain hose with a supplied insulator.
2) Connect the drain hose by pushing the extension drain hose to the insulated drain pipe.
3) Tightly insulated the connection part of the extension drain hose to the insulated drain hose and fix them with a cable
tie or tape.
• When the hole for the drain pipe on the
wall is lower than the hole for drain hose
connection
• As the draining is of natural drain type, install the drain hose in downward direction.
• Be aware that there could be water leakage when the drain hose is not firmly fixed with a cable tie or tape.
CAUTION
• If there is any foreign substance in the drain plate, it may clog the drain pip. Therefore, be sure to remove the foreign
substance inside after installation.
• Do not use the drain hose that is connected by number of hoses together.
- Water may leak from the connection part, therefore install the drain hose in one piece. However, if the length is
too short and you cannot avoid connecting number of drain hoses together, make sure to use silicone sealant or
other material for water-proofing measures. (Do not use insulating tape.)
13. Inspection and trial operation
Explain the main function of the air conditioner to the customer and complete installation.
• After connecting pipes with knock-out treatment, plug the space.
• Following the pipe connection, make sure to proceed precisely to prevent interference with the internal parts.
CAUTION
40
Mirage_AP36M0@_IBIM_E_34573A(1).indd 40
Drain hose
Insulator
Insulated drain hose
Insulator
Extension drain hose
insulator
Extension drain hose
• When the hole for the drain pipe on the
wall is higher than the hole for drain hose
connection
2012-02-21 오후 1:09:54
Advertisement
Table of Contents
