Using The Turbo Function - Samsung APV36M0 User & Installation Manual

Using the Turbo function

Turbo function will be helpful to cool or heat your room quickly and effectively by operating at the maximum fan speed for
30 minutes.
1. Turn on the air conditioner.
Press the Power button on the remote controller.
2. Set the operation mode.
Press the Turbo/Long button on the remote controller once. Turbo
indicator will appear on the remote controller display.
The air conditioner operates in High fan speed and automatically
adjusts the temperature according to the current room temperature.
The unit operates for 30 minutes and then operates in last used
mode or in Auto mode if Dry/Fan mode is most recent mode used.
• Turbo function is only available in Auto/Cool mode.
If Turbo function is selected in Dry/Fan mode, operation mode changes to Auto.
NOTE
• You cannot use Turbo and Long function at the same time.
To deactivate Turbo function
1. Press the Turbo/Long button on the remote controller twice while Turbo function is on.
The air conditioner operates in last used mode or in Auto mode if Dry/Fan mode is most recent mode used.
• While you are using the remote controller, make sure corresponding indicator appears on the remote controller
display.
NOTE
• Temperature/Fan speed cannot be adjusted while using this function.
• Air flow can be adjusted manually (see pages 21 ~ 22 for instructions).
• If you press the Mode button while the Turbo function is on, it will cancel the function.
Mirage_AP36M0@_IBIM_E_34573A(1).indd 19
19
2012-02-21 오후 1:08:43