Table of Contents
Advertisement
Fan
Fan mode can be selected to ventilate your room. Fan mode will be helpful to refresh the stale air in your room.
1. Turn on the air conditioner.
Press the Power
button on the remote controller.
2. Set the operation mode.
Press the Mode button on the remote controller until Fan mode
indicator appears on the remote controller display.
The air conditioner operates in Fan mode and circulate the indoor air.
Each time you press the Mode button, the mode will change in
order of Auto, Cool, Dry and Fan.
NOTE
3. Set the fan speed.
Press the Fan
or
desired fan speed.
Each time you press the Fan
change in order of Low, Medium and High.
NOTE
• While you are using the remote controller, make sure correct indicator which matches your selection appears on the
remote controller display.
NOTE
• Air flow can be adjusted manually (see pages 21 ~ 22 for instructions).
Mirage_AP36M0@_IBIM_E_34573A(1).indd 17
button on the remote controller to set the
or
button, fan speed will
17
2012-02-21 오후 1:08:40
Advertisement
Table of Contents
