Table of Contents
Related Manuals for Samsung AP50M0 Series
Summary of Contents for Samsung AP50M0 Series
-
Page 1: Air Conditioner
AP50M0✴ Series AP50M1✴ Series Air Conditioner user & installation manual imagine the possibilities Thank you for purchasing this Samsung product. ES FR PT AR DB68-05323A-02 Mirage_AP50M0@_IBIM_EN_05323A-02.indd 55 2016-05-19 오후 1:27:31... - Page 2 Features of your new air conditioner Strong Turbo/Long Function Your new air conditioner supports Turbo function which makes you cool fast for 30 minutes and Long function which makes the cool air goes to much further place. Look for Everywhere The elegant and harmonious design gives priority to the esthetics of your space and complements any of your existing interior décor.
-
Page 3: Table Of Contents
Contents User manual Safety precautions ..................... . . 4 Viewing your air conditioner . -
Page 4: Safety Precautions
Because the following operating instructions cover various models, the characteristics of your air conditioner may differ slightly from those described in this manual. If you have any questions, call your nearest contact center or find help and information online at www.samsung.com. Important safety symbols and precautions: Risk of death or serious personal injury. - Page 5 Never use a damaged or dusted power cable, or loosened power receptacle. f Potential risk of fire or electric shock. Install an exclusive circuit breaker and short-circuit breaker for the air conditioner. f Potential risk of electric shock or fire. Do not insert anything such as fingers or branches into the air conditioner vents while the air conditioner is running.
- Page 6 Safety precautions SEVERE WARNING SIGNS WARNING Always make sure that the power supply is compliant with current safety standards. Always install the air conditioner in compliance with current local safety standards. Verify that the voltage and frequency of the power supply comply with the specifications and that the installed power is sufficient to ensure the operation of any other domestic appliance connected to the same electric lines.
- Page 7 Do not allow children to climb on the air conditioner. Do not use the air conditioner as a cooling precision instrument for food, pets, plants, cosmetics or machinery. Do not pull or give excessive shock to the air conditioner. f Potential risk of fire, or unit malfunction and there are risk of personal injury because unit may fall down. Do not spray water directly on the air conditioner or use benzene, thinner or alcohol to clean the surface of the unit.
- Page 8 Safety precautions CAUTION SIGNS CAUTION When using a wireless remote controller, the distance should not be more than 7 meters from the air conditioner. If the remote controller is not used for a long period of time, remove the batteries to prevent leakage of electrolyte.
-
Page 9: Viewing Your Air Conditioner
Viewing your air conditioner Congratulations on the purchase of the air conditioner. We hope you enjoy the features of your air conditioner and stay cool with optimal effi ciency. Please read the manual to get started and to make the best use of the air conditioner. Checking the indoor unit and display Carefully unpack your air conditioner and check the indoor unit to make sure it is not damaged. -
Page 10: Control Panel
Viewing your air conditioner Control panel You can operate the air conditioner with the control panel when you can’t or don’t want to operate the air conditioner with the remote controller. (see pages 21.) Air swing (Up/Down) indicator Fan speed indicator Air swing (Left/Right) indicator Temperature setting Defrost indicator... -
Page 11: Checking The Remote Controller
Checking the remote controller Remote controller buttons You can activate the air conditioner by pointing the remote controller away from it. When using the remote controller, always point it directly at the air conditioner. Vertical air swing Adjusts the air flow direction up and down (Not applicable to Duct type models). -
Page 12: Remote Controller Display
Checking the remote controller Remote controller display Operation mode Remote controller *Heat mode is applicable to transmission AP50M1✴❋model only. Low battery Set temperature or on/off set time with the timer function Fan speed On/Off timer Air fl ow direction Options * These functions are not supported Single, Heater and Purity functions are not supported by this model. - Page 13 Battery changing time When the battery is exhausted,( )will be displayed in the remote controller display. When the icon appears, change the batteries. The remote controller requires two 1.5V AAA type batteries. Storing the remote controller When you do not use the remote controller for a long time, remove the batteries from the remote controller and store it in the remote controller holder.
-
Page 14: Basic Operation
Basic operation Basic operation is an operation mode that can be selected by pressing the Mode button. Auto In Auto mode, the air conditioner will automatically set the Operation(Cool/Heat Mode) and fan speed depending on the room temperature detected by the room temperature sensor. (Heat mode is applicable to AP50M1✴ model only.) Cool Cool mode is frequently used and you can freely control the temperature, fan speed, and air flow direction in cool mode. - Page 15 Turning on the power Press the button to turn on the air conditioner. Selecting the operation mode Press the button to set the operation mode. Selecting the fan speed Press the button to set the desired fan speed. Auto (Auto) Cool (Auto), (Med),...
- Page 16 Basic operation Selecting air fl ow direction This function allows you to shift the air fl ow direction up and down or left and right. Press the button to move the air fl ow direction up and down or left and right while the air conditioner is turned on.
-
Page 17: Setting The On/Off Timer
Setting the On/Off timer You can set the air conditioner to turn on/off automatically at desired time. Setting On timer while the air conditioner is off / Off timer while the air conditioner is on. When the air conditioner is off ; 1. - Page 18 Setting the On/Off timer When the air conditioner is on; 1. Press the Timer button to select (Off ). - (Off ) indicator starts to blink and you can set the time. 2. Press the < or > button to set the time. - You can set the time in 0.5 hour unit from 0.5 ~ 3 hours and 1 hour unit from 3~24 hours.
-
Page 19: Using The Turbo Function
Using the Turbo function You can set the Turbo function to provide fast and powerful cooling (heating). When the air conditioner is operating in Cool or Heat mode; 1. Press the Turbo button. - (Turbo) will be displayed and the function will operate for 30 minutes. f Press the Turbo Button. -
Page 20: Using The Long Function
Using the Long function Long function will be helpful when you want the cool air to go to much further place. 1. Press the Options button. 2. Press the < , > or Options button until (Long) indicator starts to blink. 3. -
Page 21: Using The Air Conditioner With The Control Panel
Using the air conditioner with the control panel You can control the air conditioner without the remote controller. 1. Press the Power button on the indoor unit control panel. f The air conditioner will turn on with ringing sound. Stop To turn off the air conditioner, press the Power button again. -
Page 22: Cleaning And Maintaining The Air Conditioner
Cleaning and maintaining the air conditioner Make sure to turn off the circuit breaker when cleaning the air conditioner. CAUTION Cleaning the exterior 1. Wipe the surface of the unit with a slightly wet or dry cloth when needed. Do not use Benzene, Thinner or Clorox . -
Page 23: Maintaining Your Air Conditioner
Maintaining your air conditioner If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition. 1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and turn off the circuit breaker. There may be internal damage if moisture is left in components. - Page 24 Cleaning and maintaining the air conditioner Internal protections via the unit control system This internal protection operates if an internal fault occurs in the air conditioner. Type Description Against cold air The internal fan will be off to against cold air when the heat pump is heating. Defrost cycle The internal fan will be off to against cold air when the heat pump is heating.
-
Page 25: Appendix
Appendix Troubleshooting Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses. PROBLEM SOLUTION The air conditioner does not operate • Because of the protective mechanism, the appliance does not start operating immediately after it has been immediately to keep the unit from overloading. -
Page 26: Operation Ranges
Appendix Operation ranges The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use. OPERATIONAL TEMPERATURE INDOOR MODE IF OUT OF CONDITIONS HUMIDITY INDOOR OUTDOOR Condensation may occur on the indoor COOLING 18˚C to 32˚C 21˚C to 52˚C... -
Page 27: Installation Manual
This manual explains how to install an indoor unit with a split system with two SAMSUNG units. The use of other types of units with different control systems may damage the units and invalidate the warranty. The manufacturer shall not be responsible for damages arising from the use of non compliant units. - Page 28 Safety precautions f Do not use the air conditioner in environments with hazardous substances or close to equipment that release free flames to avoid the occurrence of fires, explosions or injuries. f Our units must be installed in compliance with the spaces indicated in the manual to ensure either accessibility from both sides or ability to perform routine maintenance and repairs.
-
Page 29: Accessory Parts List
Accessory parts list ❋ ❋ Product illustration may look diff erent from the actual product. Part Name Quantity Remarks Fixing bracket for indoor unit Remote controller Remote controller holder M4 X L12 screws M4 X L14 screws Batteries for remote controller Indoor unit Protective piping cover Insulation for piping... -
Page 30: Selection Of Installation Place
Selection of installation place Indoor unit f Install the unit at a place close to the wall facing the outside as it is necessary to perform piping connection with the outdoor unit. - It is effective to install the unit at a window side to ensure uniform distribution of indoor temperature. f Install the unit at a place where there is no obstacle against the wind around the air intake and air outlet. - Page 31 Outdoor unit f A place free from the risk of combustible gas leakage. f A place which can bear the weight of the unit. f A place which can bear the fixing strength of the outdoor unit. f Avoid a place subject to oil (including machine oil). f Avoid a saline place.
-
Page 32: Preparing The Installation
Preparing the installation Selecting appropriate location for installation Decide the installation location based on the following condition and obtain the user’s approval. f Avoid a place that may disturb your neighbor. Noise may occur from the outdoor unit and the discharged air may run into the neighborhood. -
Page 33: Space Requirements
If you install several outdoor units at the same place, observe the space for ventilation and free airflow. f If the space for ventilation is insufficient, the air conditioner may not generate performance designed. Keep in mind that SAMSUNG logo is located on the front side of outdoor unit. Mirage_AP50M0@_IBIM_EN_05323A-02.indd 33... -
Page 34: Electrical Work
Electrical work The electrical work should be performed by a specialist qualified for the work. f Use the three phase power supply, and be sure to install the sub power distributing board for exclusive use with the unit (separately purchased by the user). ❋... - Page 35 Indoor and outdoor connection wiring f When connecting the wiring harness between the indoor and outdoor unit, align the outdoor side and the indoor side with the terminal board No. ❋ ❋ When the wiring harnesses of the indoor and outdoor unit are not properly connected, it may cause trouble. Be careful not to allow the indoor and outdoor wirings and power lines to get in contact with the service valve of the refrigerant system or to the pipe without an insulation.
- Page 36 Electrical work AP50M1✴ Series Using 4poles ELCB(Earth Leakage Circuit Breaker) 1. Remove the cover of electric box on side panel of the outdoor unit. 2. Connect the electric input wires [L1(R), L2(S), L3(T), N] to each terminal [L1(R), L2(S), L3(T), N] of the electric box on the outdoor unit respectively.
-
Page 37: Electrical Wiring
Electrical wiring f Connect it to the terminal board N and L for power cable to the outdoor unit. In so doing, peel off the end of the power cord by about 5mm, and press the cord to the ring terminal for hooking. - Make sure to install exclusive power supply. -
Page 38: Installation Method
Installation method Outdoor unit When using the anchor bolt Fix the unit on a flat, rigid floor using the anchor bolt. Anchor bolt fixing dimensions (Anchor bolt : M10 x 4 points - separately purchased) 670mm When using the rubber leg Put the rubber leg to the outdoor unit leg. - Page 39 Indoor unit Indoor unit Outdoor unit Indoor unit Fix the pipe S-TRAP Outdoor Fix the (Every 10 m) Outdoor unit pipe unit 4. Install the high pressure pipe to the heat exchanger liquid pipe, and the low pressure pipe to the heat exchanger gas pipe respectively using the flare nut, taking care not to cause any leakage of refrigerant.
- Page 40 Installation method Refrigerant pipe work Insulating the pipes f Make sure to insulated the refrigerant pipes with an insulation tape. If the Pipe insulator pipe is not insulated, condensate may form and drop into the indoor. Vinyl f Wind the refrigerant pipes and the drain hose with vinyl tapes. tape Indoor/ f When you bend the pipe, try to secure large bending radius (over 100 mm)
- Page 41 Connection of refrigerant piping Flare processing 1. Cut the pipe using the pipe cutter. 90° Oblique Rough Burr 2. Remove burr on the edge of pipe. Pipe - If burr is not removed after cutting the pipe, there is a risk of refrigerant gas leakage. Reamer - If foreign substance such as burr goes into the pipe, there is a risk of product breakdown.
- Page 42 Installation method Pipe bending 1. Perform bending of the pipe using the bender which has a specified bending radius. 2. Be sure to take full care to perform bending of the pipe successfully at Spring one time. Bending and unbending the pipe more than twice makes the bending work increasingly difficult.
- Page 43 Drain hose 1. Connect the drain hose by inserting the extension drain hose to the drain connection port tightly. Drain hose 2. Insulate the extension drain hose, then fix it with a cable tie or a tape. Drain hole for duct (polypropylene) Vinyl chloride Piping material...
-
Page 44: Air Purge
Air purge ❋ ❋ Be sure that all valve cocks are closed. f The air in the indoor unit and in the pipe must be purged. Make sure to vacuum inside of the connection pipe using vacuum pump after connecting pipes.(Use vacuum pump as shown at the figure.) If air remains in the refrigeration pipes, it will affect the compressor, reduce to cooling capacity and could lead to a malfunction. -
Page 45: Refrigerant Charging
Refrigerant charging How to add refrigerant 1. Connect manifold gauge to the gas side service valve. 2. Take the trial operation with the cooling trial operation mode. 3. Perform trial operation for longer than 10 minutes and add refrigerant based on the below pressure table. ❋... -
Page 46: Check And Test Operation
Check and test operation Check f Be sure to check the following again after completion of installation. 1. Check the piping connection area for any gas leakage. Indoor connection area Outdoor connection area 2. Is the drain hose properly connected? 3. -
Page 47: Test Operation
Check and test operation Test operation f After checking, read the owner’s instructions carefully, and perform a test operation. Then deliver the unit to the customer. (When delivering the unit, be sure to read carefully and follow the contents of the owner’s instructions.) f Check if the indoor/outdoor unit’s connection wires are properly connected. -
Page 48: Packing And Unpacking Guide
Packing and unpacking guide Indoor unit Cushion-top ① Cushion-mid ② Packing case ③ Indoor unit ④ Cushion-bottom ⑤ f Packing the unit as below procedure 1. Put the indoor unit ④ onto the cushion-bottom ⑤. 2. Assemble cushion-mid ② of indoor unit ④. 3. - Page 49 Packing and unpacking guide Outdoor unit Cushion-top ⑤ Outdoor unit ④ Packing case ① 4 screws ③ Wood palette ② f Packing the unit as below procedure 1. Fix the outdoor unit ④ and the wood palette ② by 4 screws ③. 2.
-
Page 50: How To Connect Your Extended Power Cables
How to connect your extended power cables 1. Prepare the following tools: Tools Crimping pliers Connection sleeve (mm) Insulation tape Contraction tube (mm) Spec MH-14 20xØ6.5(HxOD) Width 19 mm 70xØ8.0 (LxOD) Shape 2. As shown in the figure, peel off the shields from the rubber and wire of the power cable. - Page 51 4. Using a crimping tool, compress the two points and flip it over and compress another two points in the same location. - The compression dimension should be 8.0. - After compressing it, pull both sides of the wire to make sure it is firmly pressed. f Method 1 f Method 2 Compression...
- Page 52 Mirage_AP50M0@_IBIM_EN_05323A-02.indd 52 2016-05-19 오후 1:27:30...
- Page 53 Mirage_AP50M0@_IBIM_EN_05323A-02.indd 53 2016-05-19 오후 1:27:30...
- Page 54 SAUDI ARABIA 800 247 3457 (800 24/7 HELP) www.samsung.com/sa_en PAKISTAN 0800-Samsung (72678) www.samsung.com/pk/support TUNISIA 80 1000 12 www.samsung.com/n_africa/support U.A.E 800-SAMSUNG (800 - 726 7864) OMAN 800-SAMSUNG (800 - 726 7864) www.samsung.com/ae/support (English) KUWAIT 183-CALL (183-2255) www.samsung.com/ae_ar/support (Arabic) BAHRAIN 8000-GSAM (8000-4726) QATAR...