Checking before use
Using indoor unit
Make sure that curtain does not block the air inlet .
f It may decrease cooling performance by blocking air circulation.
f
In Cool mode, set the appropriate desired temperature .
f If the desired temperature is too low, it may be harmful for human body and power consumption will also increase. Set
f
the desired temperature about 5°C lower than the outdoor temperature.
When cooling the room, use air conditioner and fan together to save energy .
f When the air conditioner is used with fan, cooling will be more effective and energy can be saved.
f
When the air conditioner is operating, close the doors and windows .
f When the air conditioner is used with doors and windows open, cooling effect will decrease.
f
f If you use the air conditioner for over an hour, open the window to ventilate the air about once every hour.
f
Install the product away from sunlight or heating devices .
f Close the curtain when the sun shines.
f
f Do not use any heating devices during cooling operation. Cooling effect will decrease.
f
Storing indoor unit
Dry the air conditioner thoroughly by operating Fan mode for 3 to 4 hours .
Stop the operation and disconnect the power plug .
Do not move the product on your own. Pipe may get loose or pipe can get damaged and cause refrigerant leakage.
CAUTION
Using outdoor unit
Take away any covers or barriers .
f It may cause product failure, and poor performance in cooling by blocking air flow.
f
Installing outdoor unit
Install the outdoor unit in well ventilated area with no sunlight . If sunlight is unavoidable, install a sunshade .
8
Mirage_AP36M0@_IBIM_E_34573A(1).indd 8
2012-02-21 오후 1:08:26