5
3
Using the keypad, enter
the four-digit
administrator access
code.
Note
The Copy Track functions are for use by the administrator. The Copy Track
parameters cannot be set by anyone without knowledge of the administrator
access code. For details on the administrator access code, contact your
service representative.
4
Touch [Copy Track].
5
Touch [Copy Track
Mode].
6
Touch [Yes] to select
the "Copy Track Mode"
parameter.
To select the "Job Skip"
setting, touch [Yes],
and then touch [Enter].
(Default setting: Yes)
7
To cancel the "Copy
Track Mode"
parameter, touch [No].
The Initial Data screen appears.
5-64
5.6 Supervising Copier Use (Copy Track Functions)
Konica 8020/8031