5.2 Specifying Default Settings ("User's Choice" Functions)
To set the "Low Power" function
This function is used to specify the length of time after the last operation until the
copier automatically enters Low Power mode. (The default setting is [15 min.] ).
For details on the Low Power mode, refer to "Original Documents/Feeding the
Document" in the Basic Operations volume.
1
Press the [UTILITY] key.
2
Touch [User's Choice: 1].
3
Touch [2/2].
4
Touch [Low Power].
5
Press the [C] (CLEAR QTY.) key.
The current setting is erased.
6
Using the keypad, enter
the desired length of
time (between 10 and
240 minutes).
7
Touch [Enter].
8
Touch [Fin. Time], and
then touch [Fin. Time]
again in the screen that
appears.
Konica 8020/8031
5
5-17