5.5 Administrator Mode Operations
To set the "Thick Paper and OHP Film Image Density" function
This function allows the density of the image printed on thick paper and overhead
projector transparencies to be adjusted. (The default settings are [the standard
settings (middle settings)].)
1
Press the [UTILITY] key.
2
Touch [Admin. Mode].
3
Using the keypad, enter the administrator access code.
4
Touch [Expert Mode].
5
Touch [Thick Paper
and OHP Film Image
Density].
6
Touch
and
to adjust the image
density.
7
Touch [Enter].
8
Touch [Fin. Time] again in the next three screens that appear.
Konica 8020/8031
5
5-41