Parts Names And Their Functions; Outside Of Copier - Konica Minolta 8031 Instruction Manual

4.2 Parts Names and Their Functions

4.2 Parts Names and Their Functions

Outside of Copier

8
7
*The illustration above shows the optional platen cover, copier stand and copy desk
installed.
No. Part Name
1 Right-side door
2 Manual bypass tray
3 Power switch
4 Lower right-side door
5 2nd drawer
6 1st drawer
7 Front door
8 Copy output tray
Konica 8020/8031
6
5
Opened when clearing misfeeds.
Used for manual feeding of paper.
The paper is fed one sheet at a time.
Special paper can be loaded.
(See section 3.5 in the Basic Operations volume.)
Used to turn the copier on and off.
(See section 1.5 in the Basic Operations volume.)
Opened when clearing misfeeds.
Holds up to 500 sheets of paper.
The paper size can be adjusted freely.
(See section 3.5 in the Basic Operations volume.)
Holds 250 sheets of paper.
The paper size can be adjusted freely.
Special paper can be loaded.
(See section 3.5 in the Basic Operations volume.)
Opened when replacing a toner cartridge. (See p. 6-5)
Collects copies fed out of the copier facing down.
1
2
3
4
Description
4
4-5