Konica Minolta 8031 Instruction Manual page 180

7.1 When the Print Quality Is Poor
Symptom
The edge of the printed output is
dirty.
The image is not aligned properly
on the paper.
Konica 8020/8031
Possible Cause
The document pad is dirty.
The selected paper size is
larger than the document (with
Zoom set to "× 1.000").
The orientation of the document
is different from the orientation
of the paper (with Zoom set to
"× 1.000").
The copy was reduced to a size
smaller than the paper (a
CustomZoom setting was
selected).
The document is not positioned
correctly.
The document is not positioned
correctly in the duplexing
document feeder.
The platen glass is dirty (while
using the duplexing document
feeder).
The document guides are not
positioned along the edges of
the paper.
Curled paper was loaded into
the paper drawer.
Remedy
Clean the document pad with a
soft cloth dampened with a mild
detergent. (See p. 8-9)
Select a paper size that is the
same size as the document.
(See section 2.2 in the Basic
Operations volume.)
Otherwise, set Zoom to "Auto
Size" to enlarge the copy to the
selected paper size.
(See section 5.3 in the Basic
Operations volume.)
Select a paper size that is the
same size as the document.
Otherwise, select a paper
orientation that is the same as
that of the document.
Select a zoom ratio that adjusts
the document size to the
selected paper size.
(See section 5.3 in the Basic
Operations volume.)
Otherwise, set Zoom to "Auto
Size" to reduce the copy to the
selected paper size.
(See section 5.3 in the Basic
Operations volume.)
Correctly position the document
against the document width
scale.
(See section 4.2 in the Basic
Operations volume.)
Correctly load the document
into the duplexing document
feeder, and then slide the
document guides against it.
(See section 4.2 in the Basic
Operations volume.)
Open the duplexing document
feeder, and correctly position
the document against the
document width scale.
(See section 4.2 in the Basic
Operations volume.)
Wipe the glass with a soft dry
cloth. (See p. 8-8)
Slide the document guides
against the edges of the paper.
Flatten the paper before loading
it.
7
7-3