Konica Minolta 8031 Instruction Manual page 167

6 6.5 When the Message "Staple mode cannot be used." Appears
16
Insert the staple cartridge, making
sure the tabs on the cartridge slide
along the rails in the compartment.
17
Fully insert the staple cartridge so
that it locks into place.
❍
Check that the staple cartridge
is firmly installed.
18
Carefully move the stapler unit back into its original position.
19
Close the front door.
20
Slide the finisher back against the copier.
6-50 Konica 8020/8031