Konica Minolta 8031 Instruction Manual page 177

6
Message
Replace Staple Cartridge X.
Misfeed detected.
Re-insert the following# of
originals:
Malfunction detected.
Call your Service Rep. and
provide code:
If any message other than those listed above appears, perform the operation
described in the message.
6-60
Cause
The staples have run out.
Since a paper misfeed occurred,
the copier is unable to make
copies.
After clearing a paper misfeed, it
is necessary to reload the
documents that have already
been fed through the document
feeder.
The copier malfunctioned and is
unable to make copies.
6.11 Other Messages
Remedy
Replace the staple cartridge.
(p. 6-9)
Clear the paper misfeed.
(p. 6-17)
Load the indicated document
pages into the document feeder.
Inform your service
representative of the code
displayed on the touch panel.
Konica 8020/8031