526
7-3. Do-it-yourself maintenance
WARNING
■
Discharge headlights (if equipped)
Contact your Toyota dealer before replacing the discharge headlights
●
(including light bulbs).
Do not touch the discharge headlight's high voltage socket when the head-
●
lights are turned on.
An extremely high voltage of 30000 V will be discharged and could result
in serious injury or death by electric shock.
Do not attempt to take apart or repair the low beam headlight bulbs, con-
●
nectors, power supply circuits, or related components.
Doing so could result in electric shock and death or serious injury.
■
When replacing the rear turn signal lights or stop/tail lights
Inspect the gasket for any damage (rip, tear, hole, etc.). If there is any dam-
age, please contact your Toyota dealer and have the gasket replaced.
Improper installation of the gasket may result in water entering the rear light
unit.
■
To prevent damage or fire
Make sure bulbs are fully seated and locked.
●
Check the wattage of the bulb before installing to prevent heat damage.
●
NOTICE
■
When installing the back door trim
To prevent damage, be careful not to pinch any of the wire harnesses or
connectors with the back door trim.
SIENNA_OM_01999-08001_(U)