Table of Contents
Advertisement
Using the automatic mode
Press the "AUTO" button ("AUTO" appears on the display).
1
Adjust the temperature setting.
2
To stop the operation, press
3
■
Automatic mode indicator
If the fan speed setting or air flow modes are operated, the auto-
matic mode indicator goes off. However, automatic mode for func-
tions other than that operated are maintained.
Changing the rear setting
■
Adjusting the temperature setting
Press the "REAR" button (indicator and rear temperature on the
1
display on).
Turn the "REAR TEMP" dial clockwise to increase the tempera-
2
ture and counterclockwise to decrease the temperature.
The air conditioning system switches between individual (the lower side
indicator on the "SYNC" button is off) and simultaneous (the lower side
indicator on the "SYNC" button is on) modes each time the "SYNC" but-
ton is pressed.
■
Adjusting the fan speed
Press "" on
decrease the fan speed.
Press
■
Changing the air outlets
Press the "REAR MODE" button.
The air outlets switch each time the button is pressed. (P. 414)
SIENNA_OM_01999-08001_(U)
6-1. Using the air conditioning system and defogger
to increase the fan speed and "" to
to turn the fan off.
.
407
6
Advertisement
Table of Contents
Troubleshooting
