244
4-3. Operating the lights and wipers
■
The Automatic High Beam can be operated when
The engine switch is in the "ON" position (vehicles without a smart key sys-
tem) or IGNITION ON mode (vehicles with a smart key system).
■
Camera sensor detection information
High beam may not be automatically turned off in the following situations:
●
• When oncoming vehicles suddenly appear from a curve.
• When the vehicle is cut in front of by another.
High beam may be turned off if an oncoming vehicle that is using fog lights
●
without using the headlights is detected.
Houselights, streetlights, red traffic signals, and illuminated billboards or
●
signs may cause the high beam to turn off.
The following factors may affect the amount of time taken to turn high beam
●
on or off:
• The brightness of headlights, fog lights, and tail lights of oncoming and
preceding vehicles
• Road conditions (wetness, ice, snow etc.)
• The number of passengers and amount of baggage
High beam may be turned on or off when unexpected by the driver.
●
SIENNA_OM_01999-08001_(U)