Toyota 2015 Sienna Manual page 181

Hide thumbs Also See for 2015 Sienna:

Table of Contents

Press the switch.

Linked mirror function when reversing (if equipped)

When the mirror select switch is in the L or R position, the outside rear

view mirrors will automatically angle downwards when the vehicle is

reversing in order to give a better view of the ground.

To disable this function, move the mirror select switch to the neutral

position (between L and R).

Adjusting the mirror angle when the vehicle is reversing

With the shift lever in R, adjust the mirror angle at a desired posi-

tion. The adjusted angle will be memorized and the mirror will auto-

matically tilt to the memorized angle whenever the shift lever is

shifted to R from next time.

The memorized downward tilt position of the mirror is linked to the nor-

mal position (angle adjusted with the shift lever in other than R). There-

fore, if the normal position is changed after adjustment, the tilt position

will also change.

When the normal position is changed, readjust the angle in reversing.

SIENNA_OM_01999-08001_(U)

3-4. Adjusting the steering wheel and mirrors

Troubleshooting