Toyota 2015 Sienna Manual page 447

Hide thumbs Also See for 2015 Sienna:

Table of Contents

Programming other devices

To program other devices such as home security systems, home

door locks or lighting, contact your authorized Toyota dealer for

Reprogramming a button

The individual HomeLink

reprogrammed. To reprogram a button, follow the programming

instructions.

Operating the HomeLink

Press the appropriate HomeLink

light on the HomeLink

The HomeLink

the button is pressed.

Reprogramming a HomeLink

Press and hold the desired HomeLink

Release the buttons.

Erasing the entire HomeLink

Press and hold down the 2 out-

side buttons for 10 seconds until

the indicator light flashes.

If you sell your vehicle, be sure to

erase the programs stored in the

SIENNA_OM_01999-08001_(U)

6-4. Using the other interior features

buttons cannot be erased but can be

transceiver should turn on.

continues to send a signal for up to 20 seconds as long as

indicator light will start flashing slowly. Keep pressing the

button and press and hold the transmitter button until the

indicator light changes from a slow to a rapid flash.

memory (all three programs)

button. The HomeLink

button. After 20 seconds, the

Troubleshooting