Table of Contents
Advertisement
490
7-3. Do-it-yourself maintenance
Press and hold the tire pres-
4
sure warning reset switch
until the tire pressure warn-
ing light blinks slowly 3 times.
Vehicles without a smart key system: Wait for a few minutes with
5
the engine switch in the "ON" position and then turn the engine
switch to the "ACC" or "LOCK" position.
Vehicles with a smart key system: Wait for a few minutes with the
engine switch in IGNITION ON mode and then turn the engine
switch off.
◆
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code. Have the ID code
registered by your Toyota dealer.
SIENNA_OM_01999-08001_(U)
Advertisement
Table of Contents
Troubleshooting
